Sorry for saying 6.1 quarts so many times! Hopefully this video will help you!!

Honda Talon Oil Change
1. Get engine to normal operating temperature.
2. Remove 12mm & 17mm engine oil drain plugs on bottom side of engine. Allow 10min for engine oil to drain.
3. Install 12mm & 17mm oil plugs. Tighten to 21 lbf-ft.
4. Remove DCT filter cover. Replace oil filter and cover o-ring (lubricate rubber on back side of oil filter and cover o-ring with engine oil before installation). Tighten 2 10mm cover bolts to 9 lbf-ft.
5. Remove engine oil filter cover. Replace oil filter and cover o-ring (lubricate rubber on back side of oil filter and cover o-ring with engine oil before installation). Tighten 3 10mm cover bolts to 9 lbf-ft.
6. Fill engine with 6.1 quarts of Honda GN4 SAE 10W-30 SJ motor oil. Install engine oil filler cap.
7. Start and run engine 3min.
8. Wait 5min and check engine oil level with dipstick.
9. Reset maintenance light on speedometer display.
10. Enjoy your Talon!!!

https://apexsportsinc.com