And so.. A gasoline burner for soldering non-ferrous metals in order to assemble such a one, you need to prepare a little, and if you are prepared, then consider half the work has already been done !!!
If you want to make the same gasoline burner with your own hands, then that's what you will need from the materials.
It will be necessary to purchase some parts. And this .. 1) Brass plug with 1\2 inch internal thread,
2)Adapter coupling with 1\2 inch external thread,3)An adapter for a hose (ruff) with an internal thread of 1 \ 2 inches..
the diameter of the ruff is external 18 mm,internal 14 mm, 4)a small 1/4-inch faucet ,5) a 1/4-inch adapter coupling with an external thread,
6)A copper or brass tube with a diameter of 8 mm (inner diameter of 6 mm) with a length of at least 200 mm, 7) A copper or brass tube with a diameter of 4-5 mm with a length of at least 200 mm.
Making such a GASOLINE BURNER with your own hands is not difficult at all and will not take much time .. no special tools are needed for manufacturing.
By the way, such a GASOLINE BURNER FROM a WATER FITTING assembled by its own