Required tools and equipment:
Rev cam with trunk handle
Filter to get better camera signal
T25 Torx
10mm socket wrench
Upholstery removal tools
Something sharp to make holes in rubber wires protectors
Some stiff around 1meter wire to pull the cam cable from rear seats to trunk
Wire crimper tool
For LED tail lights additionally a 12V 30/40 amps car relay, a fuse and fuse bypass as there is no 12V on tail lights but some pulse voltage 0,4-0,7V
In my case the reverse wire was the green with yellow stripe.
Relay connection:
-30 - +12V from the fusebox / battery
-86 - ground
-85 - rev lights signal (for me was green wire with yellow stripe in LED lights), I have used some blue wire connectors to connect to reverse light wire but these were totally unreliable, had to solder the wire in the end.
-87 - power to camera

To connect to android radio it is enough to just connect chinch camera cable (if you turn on automatic reverse camera view on android radio).

If you want to use multicamera Unless you want to use DIYKIT 4 Cameras In 1 Video Control Image Combiner then the android "REVERSE" cable should get also connected to the DIY kit steering cable)


music by https://www.davidcuttermusic.com/