Published On Mar 6, 2023
Download the full file:
https://cults3d.com/en/3d-model/gadge...
The card holder with new design that You can change multi type of infill pattern you want. It cans keep 5 cards.
It is printed separate top cover and bottom cover. That you can change any pattern infill type that you like.
The 2 hook at two side with this design is more strong and durable than other design type.
Easy to print and install.
Note: It need the glue for the combine Top cover with bottom cover. I recommend use the supper glue for stick.
3D PRINTING SETTINGS
Follow the guide you can easy print this card holder.
Print with the nose: 0.4mm
Layer: 0.2mm
Wall: 1.6mm
Wall ordering: Outside to inside
-Top/Bottom thickness: 0
Top layer: 0
Bottom layer: 0
Infill:
*** With Gyroid type
infill desity : 20% ( recommend)
infill line multiplier: 2
infill overlap percentage: 50%
Support have: normal type : 5% ( only for text of hand rotate)
*** With Cross3d
infill desity : 40% ( recommend)
infill line multiplier: 2
infill overlap percentage: 50%
Support have: normal type : 5% ( only for text of hand rotate)
Speed: depend your printer.
Support me on cults3d:
https://cults3d.com/en/3d-model/gadge...