Published On Jul 2, 2016
Here is a link to my new book
https://www.amazon.com/dp/B079KJ8FJP
www.firstdensitymaterial.com
If you are interested in purchasing some jewelry my store is located here
http://www.amazon.com/handmade/First-...
https://www.gofundme.com/lab-and-work...
Here is some of the things you need or need to to know
Respirator
Comfo Classic Respirator Mask with P100 Cartridges
Copper Sulfate Bath Formula
For 1 gallon of distilled water-
32oz. Copper Sulfate
32 ml. Sulfuric Acid
10 ml. Brightener
To Mix-
Mix the bath 1 or 2.5 gallons at a time. Pour a 2.5 gallon container of distilled water into a CLEAN 5 gallon bucket. Carefully measure the sulfuric acid and add it to the water. Carefully weigh the copper sulfate and add it to the mixture. Carefully measure the brightener and add it to the mixture. Using a 1" thick CLEAN pyrex rod (grind off the sharp end) stir the mixture until all of the copper sulfate has dissolved. Usully takes several minutes of stirring. Be careful not to spill. Pour the mixture into the tank until the desired amount of bath is made.
Note: When mixing NEVER put water into acid! This can result in explosions!ALWAYS put acid into water. Then mix in the copper sulfate.
Note: Additional brightener must be added according to use. This is determined by amp-hours. For every 40 amp-hours you add 10 ml. The basic formula is 1 ml. brightener for every 5 hours at 1 amp.
Conductive Paint and lots of great info about electroforming
http://www.sherrihaab.com/
Solder
Sta-brite 8 1/8" 1#10009 (348-SB861)
Flux
Oatey Liquid flux
Power Supply $175
https://www.riogrande.com/Product/Dig...
Conductive Paint $9.95
http://www.sherrihaab.com/collections...
Zep Root killer $13.00
at your local hardware store or
https://www.amazon.com/Commercial-Cle...
Copper Pipe 3/4 $13.00
Suphric acid (sold as battery acid or drain cleaner at your local auto parts or hardware store) around $20.00
Brightener $16.00
https://www.riogrande.com/Product/Mid...