A general service for a bike involves routine maintenance to ensure its smooth operation, safety, and longevity. Here's a list of typical checks and services performed during a general bike service:

1. Engine and Transmission
Oil Change: Replace engine oil and check oil filter.
Air Filter Cleaning/Replacement: Clean or replace the air filter to ensure proper airflow.
Spark Plug Check: Inspect the spark plug, clean or replace if necessary.
Clutch Adjustment: Ensure the clutch is functioning properly and adjust as needed.
Gearbox Check: Inspect for smooth gear shifting and adjust if required.
2. Brakes
Brake Pads Inspection: Check for wear and tear on the front and rear brake pads.
Brake Fluid Check: Top up or replace brake fluid if necessary.
Brake Adjustment: Ensure both front and rear brakes are functioning correctly and adjust accordingly.
3. Chain and Sprocket
Chain Cleaning and Lubrication: Clean the chain and sprockets, lubricate them, and check for wear.
Chain Tension Adjustment: Ensure the chain has the correct tension.
4. Tyres
Tyre Pressure Check: Inflate tyres to the recommended pressure.
Tyre Tread Inspection: Check for wear and tear, replace if needed.
Wheel Alignment: Ensure proper alignment for a smoother ride.
5. Suspension
Front Fork Inspection: Check the front suspension for leaks or damage.
Rear Suspension: Inspect for smooth operation and ensure proper setting.
6. Electricals
Battery Check: Inspect battery terminals and top up distilled water if necessary.
Lights and Indicators: Test headlights, tail lights, and indicators for proper functioning.
Horn: Ensure the horn is working effectively.
7. Body and Frame
Tightening of Bolts: Ensure all nuts and bolts are securely fastened.
Lubrication of Moving Parts: Lubricate joints, foot pegs, levers, and other moving parts.
Cleaning: Wash and polish the bike, ensuring it’s clean and free of grime.
8. Cooling System (If Applicable)
Coolant Level Check: Top up or replace coolant if required (for liquid-cooled bikes).
Radiator Inspection: Check for leaks or blockages.
9. Fuel System
Fuel Line Inspection: Check for leaks in the fuel line.
Carburetor/Fuel Injector Cleaning: Clean the carburetor or fuel injector to maintain optimal fuel flow.
10. Throttle and Cables
Throttle Adjustment: Ensure the throttle responds smoothly and adjust if necessary.
Cables Inspection: Check for fraying or damage to cables and replace if required.
General service is typically recommended every 3,000 to 5,000 kilometers, but it varies depending on the bike model and usage conditions.






Follows on Facebook :   / theneeridaivelai  
Follows on Twitter :   / theneeridaivela  
Follows on Instagram :   / theneeridaivelai