Chad Kidder from Sinister Paint specializes in custom airbrushing and motorcycle paint jobs, and he uses Revolt Auto Paint for this special project. Here's a general guide on how he use’s Revolt Auto Paint and buff with CSI Ceram-X polish:

Applying Revolt Auto Paint:
1. **Preparation**: Clean and sand the surface of the vehicle thoroughly to ensure the paint adheres properly.
2. **Primer**: Apply a coat of primer to create a smooth base for the paint.
3. **Painting**: Use an appropriate spray gun to apply Revolt Auto Paint in thin, even coats. Allow each coat to dry before applying the next. Multiple coats may be necessary to achieve the desired color and finish.

Buffing with CSI Ceram-X Polish:
1. **Initial Buffing**: After the paint has fully cured, start with a clean, soft buffing pad. Apply CSI Ceram-X polish to the pad or directly to the surface.
2. **Buffing Process**: Use a buffer at a low speed to spread the polish evenly, then increase the speed to work the polish into the paint. This helps to remove imperfections and enhances the shine.
3. **Finishing**: Wipe off any excess polish with a clean microfiber cloth. For an extra glossy finish, you can apply a final layer of polish and buff again lightly.

Chad's detailed techniques and the products he uses are part of his signature approach at Sinister Paint, known for its high-quality finishes and custom designs [oai_citation:2,Sinister Paint - Bad-Ass Custom Air Brushing and Full Motorcycle Paint Jobs by Artist Chad Kidder - Hastings, MI](http://www.sinisterpaint.com/) [oai_citation:1,CSI | RevoltAutoPaint](https://revoltautopaint.com/collectio....