Reference #37061 – 2019 Vermeer D20x22 S3 Directional Drill:
-1738 hours.

Locating System(s):
-2018 DigiTrak Falcon F5 Locator.
-2023 DigiTrak F5 Transmitter (seller states: purchased 8/2023).
-2018 DigiTrak Aurora AF8 Display.
-2018 DigiTrak F5 Battery Charger.
-(2) Batteries.

LOCATING EQUIPMENT NOTES:
-LCD Graphic Display.
-Target Steering with Aurora touch Screen Display.
-Wideband Transmitter Supports Frequencies of 4.5 kHz to 45kHz.
-Transmitter Pairing Through Use of Infrared Ports.
-Transmitter Depth up to 100 Feet.
-24 Transmitter Roll Positions.
-0.1% Pitch Resolution.
-Supports Data Log and Log While Drilling Functions.
-Fluid Pressure Transmitter Capable.

Seller States: All items are in good working order. No Factory Hard Cases.

Mixing System(s):
-2020 Vermeer MX300 Mud Mixing System (660 hours).
-(2) x 2020 Vermeer TK750 750 Gallon Narrow Tanks.

MIXING SYSTEM NOTES:
-Power Pack with two 750 Gallon Narrow TK750 Tanks.
-23 hp Kohler ECH 730 EFI Gas Engine with Electric Start.

Seller States:
-All items are in good working order.
-The mixing system and tanks were ordered brand new and not a demo system.

Pipe:
410 Feet of 2.06 Firestick Drill Rods.

Seller States:
-Rods on the machine are in decent/usable shape, but getting old.
-The overall condition of the rods are fair, getting thin at the joints, with maybe 20% of them having a bit of wobble (nothing too excessive).

Accessories:
-Vermeer X3 System Direct-Connect Head with Back Teeth.
-Trident Rock Bit with Pullback Lug (seller states: Trident bit has been re-surfaced one time by Vermeer).
-Paddle Adapter with 4.5 inch Ace Extreme Bit (purchased 3/2023).
-Vermeer Quickfire Head.
-4.5 Inch Ace Extreme Bit.
-Cutter Collar.
-New Starter Rod.
-Spare 5.5 inch Ace Extreme Bit.
-6 Inch Fluted Reamer.
-12 Inch Fluted Reamer (seller states: 12 inch has never been used).

Recent Work/Modifications:
Seller States: Sub-saver recently replaced and in good shape with around 30 hours on it.

Maintenance: All regular maintenance and minor repairs have been performed in-house.

Recent Repairs / Modifications: Recently replaced slides on Kelly (upper outboard and lower inboard). Replaced hydraulic pump (4/2023) due to a cracked housing and leak at output fitting, not an internal/catastrophic failure but hydraulic fluid was drained and replaced at that time. Deutz replaced EGR valve and manifold and did a coolant flush (5/2023).

Known Issues: Rods are getting old. The rotation encoder not on unit (removed after damage). LED lights not functional. No pressure washer hose or wand. Auto-rod-greasing system is all present but hasn't been used for the last couple years.

Additional Information:
DRILL NOTES:
-Vermeer D20X22S3, Demo 2019
-74 HP Deutz Turbocharged Liquid Cooled TD2.9 Tier 4 Diesel Engine
-2,250 lbs of Rotational Torque
-19,550 Lbs of Thrust/Pullback
-R.A.T.T. System-Job Management Tool for Tough Ground Conditions
-Auto Pullback System
-Min Transport at 47" Wide
-Carriage Speed @ 167 Ft/Min High and 114 Ft/Min Low
-257 RPM Maximum Spindle Speed
-25 GPM Water Pump at 1,000 psi Max Pressure
-Rack N Pinion System (Bolted On Sections)
-Dual Joystick Common Platform Controls
-25 Gallon Fuel Capacity @ 4.5 GPH
-30 Gallon Hydraulic Fluid Capacity

SELLERS NOTES: 2019 Vermeer 20X22 S3 in good shape with 1783 hours. Working unit. Starts and runs fine. Hydraulics and water pump are strong, and have always used a Banjo pre-screen for water. Rubber tracks in good condition and machine drives straight. Auto-loader works as it should and all magnets are present. Have not had any issues with sensors or wiring harnesses.

Price is FOR ALL.

-NO TRUCK.
-NO TRAILER.
-Drill is available separate - Please contact HDD Broker for details and pricing.

For more information on the equipment displayed here, visit: http://www.hddbroker.com/en/listings/...

To view all of our equipment, visit our website at: http://www.hddbroker.com

HDD Broker, your online source for new and used directional drilling equipment.