★ Contact Me: [email protected]
Genius Guy Repairs Broken Old Motorbike Lift Table // The Result Is Amazing
1. Disassembly
Remove the top platform.
Detach the hydraulic pump and hoses.
Disconnect the electrical components.
Dismantle the frame and base.
2. Inspection and Assessment
Thoroughly inspect all components for damage, wear, and corrosion.
Identify the extent of the repairs required.
Determine if any parts need to be replaced.
3. Cleaning and Preparation
Clean all components using degreaser and solvents.
Remove any rust using wire brushes or sandblasting.
Prime and paint the frame and base as needed.
4. Hydraulic System Repair
Rebuild or replace the hydraulic pump.
Clean and replace hydraulic hoses and fittings.
Bleed the system to remove any air.
5. Electrical System Repair
Inspect all electrical components for damage.
Replace any faulty wires, switches, or connectors.
Test the electrical system for proper operation.
6. Mechanical Repairs
Straighten or replace any bent or damaged frame members.
Replace worn or damaged bearings, bushings, and seals.
Lubricate all moving parts.
7. Top Platform Repair
Repair any holes or cracks in the platform.
Clean and repaint the platform surface.
Install new safety chains and wheel chocks.
8. Reassembly
Reattach the hydraulic pump, hoses, and electrical components.
Reassemble the frame and base.
Install the top platform.
9. Testing and Calibration
Test the lift table for proper operation and safety.
Calibrate the hydraulic system to ensure precise lifting and lowering.
Perform load tests to verify the lift's capacity.
10. Final Inspection and Documentation
Conduct a final inspection to ensure all repairs and adjustments have been made.
Document the repairs and any replaced or refurbished parts.
Thanks for watching, LIKE, Subscribe and Share!"