In this video, I demonstrate how to replace brake pads and bleed the brakes, now it is not necessary to bleed the brake fluid if all you’re doing is replacing just the pads, brake fluid should only be flush if it is black or if you replace calipers, master cylinder to get rid of air in the system.

Tool:
12mm socket
14mm socket
17mm wrench
19mm wrench
10mm flare wrench
Ratchet 1/2” or 3/8”
Silicone paste
Piston compression tool
Clamps
Channellock pliers
Empty bottle
Clear vinyl tube

Permatex brake lubricant :
https://www.amazon.com/Permatex-24125...

Piston compressor tool:
https://www.amazon.com/Five-Bananas-C...

Disclaimer:
“Sokhom Garage” Will take no responsibility for any damages, injuries, losses or liabilities associated with performance on your vehicles or others property, you do this at your own risk, my video is for guidance, and educational/informational purposes. As always be safe and wear ppe (personal protection equipment)

#DIY #acura #honda #wheels #rdx #replacement #parts #brake #brakes #brakepads #brakefluid #bleedingfluid