Published On Sep 21, 2024
Only $5 for 10 PCBs and every new member get $5 bonus. + Express 24 hour / 48 hour service on https://www.pcbway.com/ ➠ ➠ ➠ In this video, I’ll show you how to replace the selenium rectifier in vintage tube radios with modern silicon diodes, while maintaining the proper voltage drop. Since silicon diodes have a lower voltage drop than selenium rectifiers, I’ll be using a MOSFET and a trimmer potentiometer to provide an adjustable voltage drop. This allows you to fine-tune the voltage to match the original circuit specs, ensuring your vintage radio operates smoothly without over-stressing any components.
This solution is practical and easy to follow, whether you’re restoring a classic tube radio or simply looking for a modern and safe replacement for the selenium rectifier.
NOTES:
The Tab of the Mosfet is at the '-' potential, so the bolt connecting it to the PCB and then to the Chassis must be a nylon one if the chassis is not a common GND.
Before applying power to the board, set the Trimmer Pot to about half-way to prevent the Mosfet from being OFF when power is applied. This will prevent the circuit from seing the full B+ across it, which may damage the Trimmer Pot.
➠ TO ORDER PCB'S:
https://www.pcbway.com/project/sharep...
➠ Links Mentioned in this Video
RG Keen's Mosfet Follies: http://www.geofex.com/Article_Folders...
🙏 Want to support the channel? ●●●●●●
/ mcaldeira
https://paypal.me/macaldeira
#TubeRadioRestoration #SeleniumRectifierReplacement #SiliconDiodeFix
●●●● HUNDREDS OF OTHER VIDEOS TO CHOOSE FROM ●●●●
✿ DIY TEST GEAR: The title says it all:
• Zener Diode Tester - Part 1. The build.
✿ RESTORATION BUILDING BLOCKS: A series of videos showing detailed steps used the restoration process of tube equipment:
• How to safely check the Power Transfo...
✿ HowTo's: Various videos on some simple techniques and projects:
• Extend tube radio FM band above 100MH...
✿ DIY CAPACITOR LEAKAGE TESTER PROJECT: One of the most viewed projects on my channel, with full design description and build instructions.
• Capacitor leakage tester design & bui...
✿ DIY TUBE TESTER PROJECT: Complete design description and build instructions for this really handy device.
• DIY Tube Tester. Working on Power Sup...
●●●● Plus full Playlists on some other completed restoration projects on this Channel ●●●●
📻 PHILIPS BX750A:
• Philips BX750A tube radio restoration...
📻 TELEFUNKEN OPUS 2114:
• Telefunken Opus 2114 stereo tube radi...
📻 SABA UW-175-Z 3D:
• Saba UW 175-Z 3D tube radio restorati...
📻 GRUNDIG 1070:
• Grundig 1070 tube radio restoration -...
📻 SCHAUB-LORENZ GOLDY 58 type 3020:
• Schaub-Lorenz Goldy 58 type 3020 tube...
📻 BUSH VHF64:
• Bush VHF64 tube radio restoration - P...
📻 GRUNDIG 3060A:
• Grundig 3060a tube radio restoration ...
📻 TELEFUNKEN OPERETTE 8:
• Telefunken Operette 8 tube radio rest...
📻 GRAETZ SUPER 171W:
• Graetz Super 171W tube radio restorat...
📻 LOEWE-OPTA MAGNET 3737W:
• Loewe-Opta Magnet 3737W tube radio re...
📻 BRAUN ATELIER 3:
• Braun Atelier 3
📻 LOEWE-OPTA TRUXA STEREO 4741W:
• Loewe-Opta Truxa Stereo 4741W
📻 GRAETZ COMEDIA 616:
• Graetz Comedia 616 tube radio restora...
📻 SABA FREIBURG W2:
• Saba Freiburg W2 (WII) restoration
📻 GRAETZ MUSICA 4R417:
• Graetz Musica 4R417 restoration