Don't forget to hit that subscribe button!
In this one I go over and finish my hydro boost swap. I did this to gain clearance for the coil pack mounting location on the driver side. Added braking power is a plus as well! This swap was easy, yet a huge pain due to location of bolts and ports. Let me know your thoughts!


insta: instagram.com/jhayes721


Parts needed for swap:
booster from Astro van (you will need the brake pushrod setup as well if you buy a new or refurb unit)
I used parts from Earls to make my lines, parts numbers:
130606ERL (6ft blue hose) or 150606ERL for black


Power steering fittings:
4 of the 90's (you can use 45's if you prefer)
139106ERL for Nickel plated or 159106ERL for black
2 of the -6 AN to 18mm x 1.50 - part 961956ERL
1 of -6 AN to 16mm x 1.50 part 961955ERL


I used my factory cooler lines.
brass 3/8 T to split the return drain lines.



As always your swap may vary so don't hold me responsible if you buy the wrong stuff for your application.















Extreme Energy by MusicToday80:   / r.  .
Attribution 3.0 Unported (CC BY 3.0)
https://creativecommons.org/licenses/...
Music provided by Free Vibes: https://goo.gl/NkGhTg