Buy Now!
New Ball Joint Set from 1AAuto.com http://1aau.to/ib/1ASBS00027

This video shows you how to install new upper & lower ball joints from TRQ on your 2007-2018 Jeep Wrangler JK.

This process should be similar on the following vehicles:
2018 Jeep Wrangler JK

Tools you will need:
• Pocket Screwdriver
• 13mm Socket http://1aau.to/obJA/1AXAA00015
• 19mm Socket http://1aau.to/oaqR/1AXAA00043
• 21mm Socket http://1aau.to/oaqR/1AXAA00043
• 24mm Socket
• 36mm Socket http://1aau.to/oco/1AAST00006
• Ball Joint Press
• Side Cutters
• 1-1/16 Inch Socket
• Torque Wrench http://1aau.to/oaR5/1AXAA00044
• Brake Parts Cleaner
• Copper Anti-Seize
• Gloves http://1aau.to/oavD/1AXSS00048
• Safety Glasses
• Floor Jack http://1aau.to/oafS/1AXAA00068
• Hammer
• Punch
• Wheel Chocks
• Wire Brush http://1aau.to/ovo/1AXAA00079

Subscribe:    / @trq  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.