✅ಯೌಟ್ಯೂಬ್ ವಿಡಿಯೋ ನೋಡಿ ಬ್ಲೌಸ್ ಕಟಿಂಗ್ ಕಲಿಯುವರಿಗಾಗಿ ಈ ವಿಡಿಯೋ || blouse cutting

desginer shivananda
- *Measuring Tape:* A flexible measuring tape is essential for taking accurate body measurements and marking the fabric.

- *Tailor's Chalk or Fabric Marker:* This is used to mark the fabric according to the measurements and pattern.

- *Scissors:* A sharp pair of fabric scissors is used to cut the fabric smoothly. It’s recommended to use scissors that are specifically designed for fabric to avoid fraying and uneven cuts.

- *Pattern Paper:* This is used to create the blouse pattern. You can either draw the pattern directly on the fabric or on pattern paper first.

- *Pins:* Pins are used to secure the fabric layers together before cutting, ensuring that the fabric doesn’t shift.

- *Ruler and French Curve:* These are used to draw straight lines and curves for the neckline, armholes, and other areas requiring precision.

---

##

The first step in the blouse cutting process is to take precise body measurements. The video emphasizes the importance of accuracy at this stage, as the entire fit of the blouse depends on these measurements. The key measurements include:

- *Bust:* Measure around the fullest part of the bust, ensuring the tape is parallel to the ground.

- *Waist:* Measure around the narrowest part of the waist.

- *Hip:* Measure around the fullest part of the hips.

- *Shoulder:* Measure from one shoulder tip to the other.

- *Armhole:* Measure around the arm at the shoulder joint.

- *Neck:* Measure around the base of the neck.

- *Blouse Length:* Measure from the top of the shoulder down to the desired length of the blouse.

- *Sleeve Length:* Measure from the shoulder seam to the desired length of the sleeve.

The video demonstrates how to take these measurements accurately, showing where the tape should be placed and how snugly it should fit around the body.

---

1. *Drafting the Front Bodice:*
- Start by drawing a vertical line for the center front.
- Mark the bust, waist, and hip measurements on the line.
- Draw horizontal lines at these points to create the bodice length.
- Using the French curve, draw the armhole and neckline curves.
- Add seam allowances (usually 1/2 inch) to all sides.

2. *Drafting the Back Bodice:*
- Similar to the front bodice, but with a higher neckline and a slightly different armhole curve.
- Add darts to the back for shaping.

3. *Drafting the Sleeves:*
- Measure the sleeve length and width.
- Draw a rectangle corresponding to these measurements.
- Use the French curve to shape the armhole and sleeve cap.
- Add seam allowances.

4. *Creating the Collar (if applicable):*
- Draft a collar pattern if the blouse design includes one.
- Ensure that the collar fits perfectly around the neckline of the bodice.

5. *Darts and Pleats:*
- Mark the darts on the bodice pattern to provide shape to the blouse.
- Pleats can be added for decorative purposes or for additional fitting.

---

#### *Fabric Preparation*

Before cutting, the fabric must be prepared:

1. *Pre-washing:* This step is crucial to prevent shrinkage after the blouse is sewn. The video suggests washing the fabric in cold water and air-drying it.

2. *Ironing:* After the fabric is dry, it should be ironed to remove any wrinkles. This ensures that the fabric lays flat and is easier to cut.

3. *Laying Out the Fabric:* The video demonstrates how to fold the fabric correctly. For a symmetrical blouse, the fabric is folded with the selvages aligned. This allows both sides of the blouse to be cut simultaneously.

4. *Pinning the Pattern:* The paper pattern is pinned to the fabric. The video highlights the importance of ensuring that the grainline of the fabric is aligned with the grainline on the pattern to prevent the blouse from twisting after sewing.

---

#### *Cutting the Fabric*

With the fabric prepared and the pattern pinned in place, the next step is cutting:

1. *Cutting Along the Lines:* The video shows how to cut along the marked lines, maintaining precision and control. The importance of keeping the scissors flat against the table to avoid lifting the fabric is emphasized.

2. *Notches and Marks:* Notches and marks are added to the fabric pieces to indicate where seams should meet, where darts are placed, and where the zipper or buttons will go.

3. *Handling Curves:* Special attention is given to cutting curved areas, such as the neckline and armholes. The video demonstrates using small, precise cuts to navigate these areas.

4. *Cutting the Sleeves:* The sleeves are cut separately, following the same method. The video explains how to ensure the sleeves are symmetrical and match the armholes perfectly.

5. *Final Checks:* Before removing the pattern pieces, the video suggests double-checking all the pieces to ensure that all necessary markings and notches have been made.

---