How to install the exhaust correctly so it doesn't leak Maybe some of your friends have experienced that installing the exhaust is difficult or always leaks. The cause is trivial, just because the installation procedure is not correct. When installing the exhaust bolts, first tighten the exhaust neck evenly (right and left), gradually and evenly. Meanwhile, just insert the bolt holding the rear exhaust without tightening it first (only as a support) so that the rear exhaust doesn't fall and burden the exhaust neck, because at this stage we need to tighten the exhaust neck first. After the exhaust neck is securely installed, then tighten the rear exhaust retaining bolt. With a technique like this, it is guaranteed that the motorbike exhaust will be tight without leaking. After replacing the exhaust gasket or there is a part of the exhaust that is porous and leaking, this method is very effective for dealing with an exhaust that always leaks at the exhaust port. Hopefully it's useful 🙏 #silabanchannel #bike shop #tutorials #exhaust