Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com http://1aau.to/ib/1ASHF00005

Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to do the replacement yourself on your 2000-06 GMC Yukon.

• Buy TRQ at 1AAuto.com: https://www.1aauto.com/yt/i/1AASP00028
• Check here for more videos on the 2000-06 GMC Yukon:    • GMC Yukon 2000-06 2nd Gen  

This process should be similar on the following vehicles:
2000 GMC Yukon XL 1500
2001 GMC Yukon XL 1500
2002 GMC Yukon XL 1500
2003 GMC Yukon XL 1500
2004 GMC Yukon XL 1500
2005 GMC Yukon XL 1500
2006 GMC Yukon XL 1500

Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oaV6/1AXAA00013
• Pry Bar http://1aau.to/oFX/1AXAA00020
• 15mm Socket http://1aau.to/oaUJ/1AXAA00015
• 22mm Socket http://1aau.to/ojq/1AXAA00266
• 36mm Socket http://1aau.to/obg/1AAST00006
• Brake Caliper Hanger http://1aau.to/ofA/1AXAA00084
• Trim Tool Set http://1aau.to/oQr/1AXXX00006
• Needle nose pliers http://1aau.to/owe/1AXAA00051
• Needle nose pliers http://1aau.to/owe/1AXAA00052
• 1/2 Inch Air Impact Gun http://1aau.to/omM/1AXAA00252
• T55 Torx Socket
• Ratchet http://1aau.to/oa9r/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oaUJ/1AXAA00015
• Swivel
• Torque Wrench http://1aau.to/oafH/1AXAA00044
• Brake Grease
• Brake Parts Cleaner
• Copper Anti-Seize
• Paper Towels http://1aau.to/ou8/1AXSS00035
• Rust Penetrant
• Center Punch http://1aau.to/ojy/1AXAA00055
• Floor Jack http://1aau.to/oMm/1AXAA00068
• Hammer http://1aau.to/oIT/1AXAA00091
• Jack Stands http://1aau.to/oJC/1AXAA00065
• Wheel Chocks
• Wire Brush http://1aau.to/ooH/1AXAA00079

Subscribe:    / @trq  

Check out our playlist:
GMC Yukon 2000-06 2nd Gen:    • GMC Yukon 2000-06 2nd Gen  

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.