In this video I will take you in depth into getting started with the XTOOL F1 ULTRA and the RA2 rotary module! I will take you right from the basics to processing more challenging work pieces with a very useful upgrade for the RA2.

Although the RA2 is one of the best rotary modules out there - there are some limitations to what it can do and even more so when working inside of enclosed areas like the xTool F1 ULTRA. Therefore, I designed my tilt mechanism upgrade to overcome these challenges and unlock more possibilities when it comes to rotary engraving inside the F1 ULTRA.

F1 ULTRA Rotary Tilt Kit:
► https://embracemaking.com/products/xt...

Back Stop and Bubble Level Holder:
► https://embracemaking.com/products/xt...

Since the F1 does not come with laser safety glasses, I have made safety glasses available that protect your eyes from both blue and infrared laser light. (Perfect for the F1 ULTRA). You can find those glasses here:

► https://embracemaking.com/products/la...

Haven't purchased your XTOOL F1 ULTRA yet? Links below for the best XTool prices!

XTOOL F1 ULTRA:
► https://www.xtool.com/products/xtool-...

XTOOL F1 ULTRA deluxe bundle:
► https://www.xtool.com/products/xtool-...

RA2 Module:
► https://www.xtool.com/products/xtool-...

In addition to the tilt mechanism, I have also designed and made available a V-Block fixturing kit for the XTOOL F1 ULTRA as shown in this video to process round items without the RA2. It also supports engraving for pencils and bottle openers:

F1 to F1 Ultra Fixture Adapter:
► https://embracemaking.com/products/xt...

F1 V-Block, Pencil, Bottle Opener Jig
► https://embracemaking.com/products/xt...

If you need fume extraction solutions for the XTOOL F1, see below:

Fume Filtration and Extraction
► https://embracemaking.com/collections...

Here you can find the 3" to 4" Hose Adapter:
► https://embracemaking.com/products/3-...

xTool hose to xTool Smoke and Purifier Adapter:
► https://embracemaking.com/products/xt...

xTool Smoke and Fume Filtration System:
► https://www.xtool.com/products/pre-or...

xTool 6" Inline Duct Fan:
► https://www.xtool.com/products/xtool-...

If you are looking for products or items I've used with the F1 ULTRA in this video, see below. As an Amazon Associate may I earn from qualifying purchases (at no extra cost to you):

4" Inline Duct Fan with Controller
► https://amzn.to/4a91Nd4

Air Quality Monitor
► https://amzn.to/3xgoaA2

Electric Screwdriver:
► https://amzn.to/3P43fpz

Digital Calipers:
► https://amzn.to/48IQh7w

40oz Tumblers (4 pack):
► https://amzn.to/3Mr0EV0

Tall Stainless Tumbler 4-Pack
► https://amzn.to/3CWBXLh

12oz Mug With Handle (8 Pack)
► https://amzn.to/3wqDadE

12oz Tumbler With Straw (12 Pack)
► https://amzn.to/3HZswgC

20oz Tumbler With Straw (25 Pack)
► https://amzn.to/48hQONK

50 Wood Pencil Pack
► https://amzn.to/3UIzbTT

100pcs Aluminum Bottle Openers
► https://amzn.to/48sdjja

Always remember to practice proper laser safety. These lasers can seriously harm your eyes or indirectly (your lungs/health). ALWAYS wear your safety glasses!

Thank you @xToollaser

0:00 Intro
0:42 RA2 Basics
3:08 Tilt Mechanism Upgrade
10:23 40oz Tumbler With Handle Setup
12:20 XCS 40oz Tumbler Tests
23:02 40oz Tumbler Example
29:14 Tumbler With Taper
32:20 Full Wrap Engrave
36:11 Thick Powder Coating Settings
41:57 Stainless Steel Rings
47:20 No Rotary? No Problem!
52:39 Outro

#tumblertutorial #engraving #xtool

*******************************************************

If you have benefited from my content and are feeling generous I would love your support! You can "buy me a coffee" here:

► https://www.paypal.com/donate/?hosted...

By supporting my channel you are encouraging me to continue with this time consuming endeavor. A lot of time goes into design work, building my projects, filming the videos, editing the videos, etc. Plus it all costs money! Your generosity goes a long way in helping me bring you better content as often as I can!

Follow me on Instagram!

►   / embracemaking